Tutti Designs Nativity Crown Scene

Hi everyone, Laurie here today.

I have a great start on my Christmas cards already.... using Tutti Designs Nativity Crown Scene die!

First I cut out a black dotted nesting square, and a white one the size below it.

Then I used the Nativity Crown scene....

and cut that out in black too.

 I traced the outline of the die onto a piece of alcohol ink paper, cut it out and adhered it all together. 

Then I used a toothbrush, clear block,and white paint to add some spatters.

I added some foam to the back to give it some dimension, then adhered it onto the card. I stamped the sentiment in black at the bottom.

One enamel dot on the star and the card was finished!

                                                             Here's a list of dies I used:

Tutti-471 Nativity Crown Scene

Tutti-416 Dotted Nesting Squares

and here are some Tutti Designs quick links:

Tutti Designs Store

Tutti Designs Pinterest

Tutti Designs Facebook

Tutti Designs Blog

Have a great day!

Laurie

Happiness From My Heart To Yours

Hello everyone! Jenn here today sharing a cheerful card created using the Amazing Tutti Designs Dies!!

I wanted to step out of my color comfort zone a bit and was very surprised at how much I loved it!

For this card the following Tutti Dies were used:

Other Supplies used:

White, Navy, Yellow cardstock

Designer paper and embellishment collection (Genevieve by BoBunny)

Adhesive Tape Runner

Glue Stick

Foam Adhesive Dots

Hot Glue

Flowers from ReneaBouquets

The Tutti Vine die has so much detail and I love it for layering under flowers and embellishments!! It just adds that extra texture and detail to make a card pop!

To create this card I made the following cuts and die cuts:

White Card base - 5 X 7 

Inside - Page 1

4 3/4 X 6 3/4 - Pattern

Largest Cross Stitched Nesting Circle Die - Navy

2nd Largest Cross Stitched Nesting Circle Die - Pattern

Inside - Page 2

4 3/4 X 6 3/4 - Pattern

Strip of scrap

4 X 6 - Yellow

Embellished with Sentiment and cut outs from designer paper collection

Front of Card

4 3/4 X 6 3/4 - Pattern

4 1/4 X 6 1/4 - Yellow

4 X 6 - Pattern

Tutti Vine Die - Navy

Tutti Vine Die - White

Tutti Vine Die - Pattern

The vine leaves were cut apart to adhere as shown in layers

All edges of paper were distressed with a distress tool

The inside of this card open

Thank You for visiting my post today!! I hope you are inspired to get out your tools and supplies and create!!

Be sure to visit the Tutti Designs Store  for all available die cuts in the most recent release along with the full inventory of Tutti Dies.

You'll find more inspiration on our other Tutti Designs sites:

Tutti Designs Blog

Tutti Designs Facebook Page

Tutti Designs Pinterest Projects

Until Next Thursday, and always, stay crafty!!

Thanks! 

Jenn

Holiday Collage

Thank you and welcome back. I am here to share my card with you.  

Using the wonderful Tutti Designs Dies.

Holiday Collage - TUTTI 465

Joy To The World - TUTTI 473

 

This was fun, fast card but sometimes that happens

I cut the Joy To the World out of glitter cardstock and adhered to the front panel

I cut the Holiday Collage die in thirds and used two on the front panel and one on the inside pop up

I used glitter cardstock and adhered to the inside pop up 

Thanks again for stopping and for these dies and more wonderful inspirations stop by the store, blog and for all the links, see below.  

Tutti Designs Store
Tutti Designs Blog
Tutti Designs Facebook
Tutti Designs Pinterest

Until next time Happy Crafting!

Fall Leaves Scroll

Today's two cards feature the Fall Leaves Scroll die.

The first card has an embossed background,
 a holographic butterfly, bow,
and a 'button' sentiment'!
The 'Fall Leaves Scroll' was cut from a fall designer paper.

The second card was created in somewhat the same way,

designer papers, embossing, an added gold metallic bow and button!

Fall Leaves Scroll

Visit here daily for fabulous inspiration on how to use your Tutti dies!!

And here are some Tutti Designs quick links:

Tutti Designs Store

Tutti Designs Pinterest

Tutti Designs Facebook

Tutti Designs Blog

Thank you for visiting with me today!

Rejoice

Happy Monday Friends!
Darlene with you today sharing another sweet holiday card

using not just one ... but two (or three) of the fabulous dies from the Tutti Designs Store.

The Tutti Designs dies used on this creation are:

Angel Corner


Madonna & Baby


Stitched Nesting Circles

 

I've used a sheet of musical designer paper for the background as
well as a scrap strip of designer paper as my sentiment panel.

After die cutting my Madonna & Baby panel from Gold Metallic card stock, I die cut a white panel for the backing so the musical paper was what showed through the 'cut outs'.  I still felt it needed some background color so I die cut another panel from a scrap of card stock ... laid it on my white background circle panel then carefully sponged a little blue ink in the areas I wanted identified as the sky.

Next I die cut a couple more Madonna & Baby panels and glued them all together for added dimension before adhering it to my white circle panel.
 

I've also die cut the Angel Corner from the same Gold Metallic paper.
I adhered it to a panel of white card stock then did a bit of fussy cutting so the musical paper would show through.

Another peek at the finished card creation.

Please be sure to pop over to the Tutti Designs Store
and check out all of the fabulous dies available.

Need more inspiration? 

The team has something new to share here on the Tutti Designs Blog  
EVERY DAY MONDAY THROUGH FRIDAY!  
Pop in often and see for yourself ... what a talented group of designers!!

For your convenience, here are all the Tutti Designs quick links you will need:

Tutti Designs Store

Tutti Designs Pinterest

Tutti Designs Facebook

Tutti Designs Blog

Thanks for stopping in ... have a great week!

Witch Shaker Card

Hi everyone!

Laurie here with a Halloween shaker card I made using the Cute Witch die. It was well named, as it is adorable! 

First I made my background by sponging some distress inks onto a piece of water color paper, and giving is a spritz of water:

Then I cut out a circle

with a scalloped nesting circle die:

 I also cut out the black frame and added some foam and a piece of acetate. 

Inside the shaker I adhered the Cute Witch and some confetti stars.

Here's a list of the dies I used:

Tutti-418 Scalloped Stitched Nesting Rectangles

Tutti-476 Cute Witch

Here are some Tutti Designs quick links:

Tutti Designs Store

Tutti Designs Pinterest

Tutti Designs Facebook

Tutti Designs Blog

Have a great day!

Laurie

Elegance Wedding Card

Hello everyone! Jenn here today sharing a simple yet elegant Wedding card I created with the amazing Tutti Designs Dies!!

The dies used here:

I used the two largest from each set below.

Cuts to make:

Card Base:

Black cardstock 9X6 folded in half and burnished to make a 4.5 X 6 card.

For the inside layer, cut a piece of Ivory cardstock to 4.25 X 5.75. Sponge the edges gently with a sponge and black distress ink. Stamp a sentiment. I always coat my stamping with clear embossing powder and set with my heat tool to ensure that it is sealed and will not smudge.

Use glue or a tape gun to the back and adhere to the inside.

For the front of the card:

Die Cuts

1 large dotted nesting rectangle - black cardstock

1 2nd largest dotted nesting rectangle - Ivory cardstock

1 2nd largest cross stitched circle - Ivory cardstock

1 3rd largest cross stitched circle - black cardstock

1 patterned piece cut to 4.25 X 5.75 as the main base on front. Adhere the circles and rectangles together as shown. Add a fussy cut wedding couple with foam adhesive squares to pop it up.

Add a sentiment stamp (best wishes used here)

Assemble as shown or you can rearrange however you like.

You could add some flowers or other embellishments if you like. I wanted a very clean, elegant look with mine and so I stuck with just the black and ivory.

Thank You for visiting my post today!! I hope you are inspired to get out your tools and supplies and create!!

Be sure to visit the Tutti Designs Store  for all available die cuts in the most recent release along with the full inventory of Tutti Dies.

You'll find more inspiration on our other Tutti Designs sites:

Tutti Designs Blog

Tutti Designs Facebook Page

Tutti Designs Pinterest Projects

Until Next Thursday, and always, stay crafty!!

Thanks! 

Jenn

Holiday Window

Thank you and welcome back.  I am here to share my card with you.  

Using the wonderful Tutti Designs Dies.

Holiday Window TUTTI-466 

 Dotted Nesting Circles TUTTI-415

I cut out three circles small medium large, using the dotted nesting die, however, forgot to take a photo of it, I cut the black cardstock in half or almost, and adhered to the top of the front panel of the card base using foam adhesive strips, then the second layer and third.  I added the cut Holiday Window to the silver foil and adhered to the circle cut out part

I stamped a sentiment to the bottom of the front panel and embossed it using silver, and heat set it.  Pretty clean and simple with a bit of depth.

Thanks again for stopping and for these dies and more wonderful inspirations stop by the store, blog and for all the links, see below.  

Tutti Designs Store
Tutti Designs Blog
Tutti Designs Facebook
Tutti Designs Pinterest

Until next time Happy Crafting!